background image

13

ConSoLE oPErATion

Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.

A)  LArGE LED WinDoWS

: time & distance.

B)  LCD WinDoW

: calories, heart rate, incline, speed, % complete, and scan.

C)  FEEDBACK LEDS

: indicate what workout feedback is currently being displayed in the lcd window.

D)  ProGrAM LEDS

: indicate what program is currently selected.

E)  SAVED ProGrAM LEDS

: indicate what saved program is currently selected.

F)  STArT

: press start to begin exercising, starts your workout, or resume exercising after pause.

G)  SToP

: press to pause/end your workout. Hold for 3 seconds to reset the console.

H)  inCLinE   /   KEYS

: used to adjust incline in small increments (0.5% Increments). 

i)  SPEED + / - KEYS

: used to adjust speed in small increments (0.1 Mph increments). 

J)  EnTEr

: used to select programs and confirm settings. Press to change display feedback during workout. To enter scan 

mode, press enter until scan led is illuminated.

K)  SELECT WorKoUT KEY

: used to scroll through programs.

L)  SAVE WorKoUT KEY

: after your workout, press to save a workout for future use.

M)  inCLinE MYKEYS™

: used to reach desired incline more quickly. See next page for details.

n)  SPEED MYKEYS™

: used to reach desired speed more quickly. See next page for details.

o)  MP3 PLAYEr PoCKET

: used to store your mp3 player.

P)  SPEAKErS

: music plays through speakers when your cd / mp3 player is connected to the console. 

Q)  AUDio in JACK

: plug your cd / mp3 player into the console using the included audio adaptor cable.

r)  AUDio oUT / HEADPHonE JACK

: plug your headphones into this jack to listen to your music through the headphones. 

Note: when headphones are plugged into the headphone jack the sound will no longer come out through the speakers.

S)  SAFETY KEY PoSiTion

: enables treadmill when safety key is inserted.

T)  WATEr BoTTLE PoCKETS

: holds personal workout equipment.

U)  rEADinG rACK

: holds reading material.

Summary of Contents for CT5.1





















Reviews: