Horizon Fitness CE9.2, Owner'S Manual

Page: 12 / 64

12
BOLT (M)
SPRING WASHER (B)
FLAT WASHER (K)
WAVY WASHER (L)
PEDAL ARM
CRANK
PEDAL ARM WHEEL
GUIDE RAIL
CONSOLE MAST
PRE-INSTALLED BOLTS
CONSOLE CABLE
MAIN FRAME
ASSEMBLY STEp 3
A
Open hardware bag 3 .
B
Carefully pull the console cable through
the console mast using the twist tie located
inside the console mast .
C
gently slide the console mast onto the
main frame and attach console mast to
main frame using pre-installed bolts .
D
Slide
wavy washer (l)
over
cranK
followed by
pedal arm
as shown. Rest
pedal arm wheel
on
guide rail
.
E
Attach the pedal arm to the cranK using 1
flat washer (K) , 1 spring washer (b)
and 1 bolt (m) .
F
Repeat steps D–E on the opposite side of the
elliptical.
BOLT (M)
20 mm
Qty: 2 SPRING WASHER (B)
15 mm
Qty: 2 FLAT WASHER (K)
20 mm
Qty: 2 WAVY WASHER (L)
22.5 mm
Qty: 2
HARdWARE bAG 3
CONTENTS :
NOTE: Be
careful not
to pinch any
wires while
attaching the
console mast.