For any questions regarding this product, please contact your local
agency, or inquire from the HORIBA website.
(http://global.horiba.com/contact_e/index.htm)
http://www.horiba.com
2 Miyanohigashi, Kisshoin Minami-ku, Kyoto 601-8510 Japan
CODE:GZ0000251386B
July, 2012 © 2011
2012 HORIBA, Ltd.
pH Meter F-70 series
Instruction Manual for Electrode Stand FA-70S/L
Thank you for purchasing a HORIBA electrode stand. Read
this manual carefully before use. After reading these
instructions, store the equipment carefully in a convenient
location.
Points of concern
To clean the electrode stand, use a dry silicon cloth or
other soft cloth and wipe away the dirt.
If the stand base is excessively dirty, wash it with water
using a commercially available neutral detergent.
The electrode stand is mainly composed of ABS resins
so be particularly careful to protect it from organic sol-
vents.
Hold the electrode stand by its base when moving it.
Packaged Contents
Tools
Phillips screwdriver (for assembling)
Flathead screwdriver (for repair)
Consumable Parts
The following consumable part is sold separately. When the
part is broken or lost, purchase a new one.
No.
Name
Q’ty
FA-70S
FA-70L
①
Base
1 pc
1 pc
②
-1
Rod STD
1 pc
-
②
-2
Rod LONG
-
1 pc
③
Electrode arm
1 pc
1 pc
④
Stopper
1 pc
1 pc
⑤
Screw
1 pc
1 pc
Stopper cap
1 pc
-
⑥
Instruction manual (this sheet)
1 copy
1 copy
A lever for slide is fitted with the long type rod.
Name
Parts No.
Sensor holder
3200373961
Assembling Electrode Stand
Base
1. Insert the rod into a hole of the base.
2. Position a hole of the rod and a hole of the base.
3. Tighten the screw with a phillips screwdriver.
Attachment of the stopper
1. Loosen a screw of the stopper.
2. Install the stopper from the top of the rod.
3. Tighten the screw of stopper at the desired height.
Lever for slide
*For the long type rod,
while pressing the lever for slide.
elongate the bottom side of the rod
