Layout
How to Connect
* Do not press on any buttons when connecting the USB cable.
* Check the connector direction before inserting.
L
T Button
L
B Button
RT Button
RB Button
Left Stick
(LSB Button)
V
iew Button
Menu Button
X
box® Guide button
Y Button
B Button
A Button
X Button
R
ight Stick
(RSB Button)
S
hare Button
Status LED
USB Connector
Quick Release
C
ontroller Cable
M
ic On/Off Button
M
ic LED
D
irectional Pad
P
rofile LED
Profile Button
Audio Control Button
H
eadphone/Mic Jack
Quick Release
Your controller cord has a quick release.This is a safety feature designed to reduce the chance of the
Xbox Series X|S console or computer from falling when the cord is pulled.
If the console or computer falls and hits someone, especially a small child, it could cause a serious injury.
To reduce the risk of injuries or damage to the console or computer, it is important to use the controller and
the quick release properly. Use the controller connector, not the quick release, to routinely connect and
disconnect the controller. If the quick release disconnects, simply reconnect it by aligning the grooved
indentations and pressing the two parts completely together. The controller will not work unless the quick release
is connected properly. Never tape, glue, or otherwise prevent the quick release from pulling apart.
The quick release reduces, but does not eliminate, the risk of the computer or console being pulled off its surface.
To further reduce the risk:
• Do not allow anyone to pull on the controller or controller cord in a way that causes the computer or console
to move.
• Do not allow controller cords to become crossed or tangled with one another.
Connect to the USB port of the Xbox Series X|S console.
