18
Chapter3 Hardware connection
3.1 RJ45 port connection
Connect the RJ45 port of the switch and the corresponding network device
via cables, the POE power supply function of the switch is default enabled
on the downlink port of the switch, which can be used for IEEE802.3af or
IEEE802.3at standards powered devices such as APs, bridges, and network
cameras
Note：
When the switch connected workstations, servers, routers or
other ethernet devices the cable length should be within 100
meters;
The Auto-MDI / MDIX ethernet interface is enabled by default. Category
5,the standard network cable or crossover cable can be used for Ethernet
connection.
