![Hoppe AUDIO SHADE Installation Instructions & Owner'S Manual Download Page 6](http://html.mh-extra.com/html/hoppe/audio-shade/audio-shade_installation-instructions-and-owners-manual_2161918006.webp)
Revision -
6 of 22
Figure 2: Fuse locations.
Fuse 1 Box A: 30 amp mini fuse for rear light bar
Fuse 2 Box A: 10 amp mini fuse for interior light
Fuse 3 Box A: 30 amp mini fuse for front light bar / radio receiver power.
Fuse 4 Box A: 10 amp mini fuse for illumination / radio receiver ignition.
Fuse Box B: Each amplifier uses a 40 amp J-Case fuse located under the black
plastic cover shown in Figure 2.
2.5 Warnings:
This off-road top adds up to 150 lbs. to your vehicle and is located up high on the roll
cage. This increases the vehicles center of gravity and changes the vehicle dynamics and
handling characteristics. Use extra caution as you learn the driving characteristics of your
vehicles performance with your new off-road top installed. High speed cornering, off
camber or side hill, acceleration, and braking performance will be negatively impacted by
the weight of the top.
Do not listen to your stereo at an uncomfortable volume for extended periods of time.
Potential hearing loss may result.
The driving lights provided with your Audio Shade are blinding to oncoming drivers.
These are made for off road use only, and should be turned off when another vehicle is
approaching on the trail.
FUSE BOX B
40A J-CASE FUSE
FUSE BOX A
30A MINI FUSE (2X)
10A MINI FUSE (2X)