HTTP/HTTPS
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
8029HEPTA-V2/GPS GPS - NTP Time Server with LAN Interface - V08.00
93 / 130
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
Overview
Full listening of all optional functions with the current activation status and stored activation
key
Activate Feature
Input field to enter a new activation key. After entering the feature is activated by pressing the
Apply button.
If the activation was successful the new feature is listed in the overvie
w with status “Active”
and can be used immediately.
Key Reset
Clears all activation keys and sets all optional features to status “Inactive”. All other non-
optional features are still available after performing the key reset. If an optional feature is
enabled again, the last stored configuration for this feature is restored.
8.3.5.9 Diagnostics Function
It "status messages" is enabled the output is processed as SYSLOG message. This function
should only be used/enabled in case a problem arises and after consulting the
hopf
support.
8.3.5.10
Passwords (Master/Device)
Differentiation is made between upper and lower case characters in passwords. In principle,
all alphanumeric characters and the following symbols are allowed in passwords:
. , ! " $ % & / { } [ ] ( ) = ? \ + - @ * ~ # ' < > | ; : _
(See also
Chapter 8.2.1 LOGIN and LOGOUT as User
A new password must contain at least one capital letter and lowercase
letter, a number, and six characters.
