HTTP
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
4985LAN Large Matrix Display 4985 - V08.00
39 / 84
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
5.3.3.3 Routing (Activation Key necessary)
Additional static routes can be configured if the module is not only used in the local sub net
and if connection cannot be established via the configured standard gateway.
The gateway / gateway host needs to be in the local sub-network range of the module in order
to use the static routes.
The parameterization of this feature is a critical process as an incorrect
configuration may lead to considerable problems on the network!
WebGUI with Routing activated
The image above shows every configured route of the base system routing table as well as
the user’s defined static routes.
The module cannot be used as a router
!
By selecting
Use Route File
you can set up whether the under
User Defined Routes
set
routing configuration should be used, or if routing configuration should take place by using a
routing file.
If IPv6 routes are required, the routes must be made using the settings in
Chapter 5.3.3.4