39
6
Inverter Instruction
6.1 Remove inverter
Before operating, make sure that the circuit breaker between the inverter and the grid is disconnected,
and the "DC SWITCH" is placed in the "OFF" state.
1)
Disconnect all electrical connections to the inverter, including the AC output line, RS485
communication line, DC input line and protective ground.
2)
Remove the inverter from the backplane.
6.2 Replacement of inverter
After the old inverter is dismantled, if the new inverter needs to be replaced, the order of operation
in Chapter 3, 4 can be achieved.
6.3 Packaging inverter
If you still keep the original packaging of the inverter, please put it in the original packaging,
and pack it firmly with adhesive tape.
If you can't find the original package, pack it firmly in a hard carton suitable for the inverter's
weight and size.
6.4 Scrapped inverter
When the service life of the inverter expires or failures are replaced, it can be disposed of in
accordance with the applicable electrical waste disposal bills in the place where the inverter is
installed, or it can be handed over to Ho Wang Electric Customer Service Personnel.
-- This chapter end --
