background image

Safety and Regulatory Information 

 
 

Warning 
 

To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dange-
rously high voltages are present inside the unit. Do not disassemble the unit. Refer 
servicing to qualified personnel only. 
 
This equipment is not intended for use in critical applications where its failure to 
operate would create immediate life threatening circumstances.  Applications in-
cluding, but not limited to, nuclear reactor control, aerospace navigation systems 
and life support systems are not appropriate for this product. 
 
This product is a UL Listed Component and must be used with a listed computer. 
 
A readily accessible disconnect device shall be incorporated in the building installa-
tion wiring.  Installation shall be in accordance with the National Electric Code and 
authorities having jurisdiction.

 

 

FCC Notice 

 
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial environment.  This equipment generates, uses and 
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, 
may cause harmful interference to radio communications.  Operation of this equipment in a residential area 
is likely to cause harmful interference in which case the user will be required to correct the interference at 
his own expense.  Any changes or modifications not expressly approved by the grantee of this device could 
void the user’s authority to operate the device.  
  

Summary of Contents for HIS-WL19-*A Series

























Reviews: