background image

Safety and Regulatory Information

ML23D User Manual, 99172C, September 2021 

 3

Safety and Regulatory Information

To prevent fire or shock hazard, do not expose live components to rain or moisture.  

Dangerously high voltages are present inside the unit�  Do not disassemble the 

unit.  Refer servicing to qualified personnel only.  Operator could be exposed to 

dangerously high voltage if AC power is not connected properly�  Verify all wiring is 

properly connected�

This equipment is not intended for use in critical applications where its failure 

to operate would create immediate life threatening circumstances�  Applications 

including, but not limited to, nuclear reactor control, aerospace navigation systems 

and life support systems are not appropriate for this product�

This product is intended to be mounted in a suitable cabinet or other enclosure�  

The NEMA 4, 4X, or 12 ratings are applicable only when properly installed in a like 

rated enclosure�

To be covered by UL 60950 3

rd

 Edition, the socket-outlet shall be installed near the 

equipment and shall be easily accessible�

DC Supplied Units only:  The HISML23 subject unit is to be powered by a Listed 

Power Supply suitable for the application with outputs at SELV/LPS or Class 2 levels 

rated 9.6-36.6VDC, 2.5 A max.  The equipment is not intended to connect directly to 

a DC Mains source�

FCC Notice

This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated 

in a commercial environment.  This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the instruction manual, 

may cause harmful interference to radio communications�  Operation of this equipment 

in a residential area is likely to cause harmful interference in which case the user will be 

required to correct the interference at his own expense.  Any changes or modifications not 

expressly approved by the grantee of this device could void the user’s authority to operate 

the device�

WARNING!

!

Summary of Contents for HIS-ML23 Series

































Reviews: