8
1.
To display the Main Menu, press button [1].
Note: All OSD menus and adjustment screens disappear automatically after about
15 seconds. This is adjustable through the OSD timeout setting in the setup menu.
2.
To select a control to adjust, press
or
to scroll up or down in the Main Menu.
3.
After the desired control is selected, press button [2]. A control screen like the one
shown below appears.
4.
To adjust the setting, press the up
or down
buttons.
5.
To save the adjustments and exit the menu, press button [1]
twice
.
The following tips may help optimize your display:
•
Adjust the computer’s graphics card so that it outputs a 1024 x 768 @ 60 Hz video
signal to the LCD display. (Look for instructions on “changing the refresh rate” in
the graphics card’s user guide.)
•
If necessary, make small adjustments using H. POSITION and V. POSITION until
the screen image is completely visible. (The black border around the edge of the
screen should barely touch the illuminated “active area” of the LCD display.)
The area at the bottom of the
screen shows the current func-
tions of buttons 1 and 2.
Summary of Contents for HIS-ML15-***E Series
Page 19: ...19 Rear and Bottom Views ...
