Hoover VHC 680F, Instruction Book, Page: 18 / 184

18
Cancelling and resetting the
programme
To cancel a programme press the button for 3 seconds. The DRY light will
flash to indicate that it has been reset.
Start Delay
The Delay Start Function allows the user to delay the start of the drying
cycle by 3, 6 or 9 hours.
When the function is first selected the display will show a delay of 3 hours,
subsequent presses of the button will increase the delay to 6 or 9 hours.
To commence the programme press and the appliance will complete the
drying cycle at the end of this time. The 3, 6 or 9 hour indicator light will flash
to indicate that the start delay is in progress.
Cleaning the dryer
● Clean the filter and empty the water
container after every drying cycle.
● Regularly clean the condenser.
● After each period of use, wipe the inside of
the drum and leave the door open for a
while to allow circulation of air to dry it.
● Wipe the outside of the machine and the
door with a soft cloth.
●
DO NOT use abrasive pads or cleaning
agents.
● To prevent the door sticking or the build up
of fluff periodically clean the inner door and
gasket with a damp cloth.
Technical specifications
Drum capacity 115 litres
Maximum load 8 kg
Height 85cm
Width 60cm
Depth 60cm
Energy Label Band C
IMPORTANT
Always switch
off and remove
the plug from
the electricity
supply before
cleaning this
appliance.
For electrical data
refer to the
rating label on
the front of the
dryer cabinet
(with the door
open).
Cleaning and Routine
Maintenance
40005995Eng.qxd 24/07/2009 12:19 Page 18