Hoover UMS01, Manual

Page: 59 / 124

EN
59
l
The washing machine comes with a
special filter able to trap large residue,
such as buttons or coins, which could
clog the drain (according to the model,
consider version
A or B ).
l
ONLY AVAILABLE ON CERTAIN MODELS :
pull out the corrugated hose, remove the
stopper and drain the water into a container.
l
Ensure all the water has been emptied
from the drum.
l
Before unscrewing the filter, we
recommend you place an absorbent cloth
under it to keep the floor dry. A small
amount of water will come out of the filter
as you remove it - this is normal.
l
Turn the filter counter-clockwise to the
limit stop.
l
Remove and clean the filter; when
finished, replace it turning it clockwise.
The filter handle will be locked when it is
not possible to turn any further and the
handle is horizontal. Smearing a small
amount of liquid soap on the filter seal will
help refitting.
l
Repeat the previous steps in reverse
order to reassemble all parts.
B
A
l
Should the washing machine be stored in
an unheated room for a long period of
time, drain all water from tubes.
l
Unplug the washing machine.
l
Detach the tube from the drainage system
and clip on the rear of the machine and
lower it, fully draining water into a bowl.
l
Secure the drain tube with the drainage
system and clip on the rear of the
machine when finished.
l
Keep the door glass and gasket clean.
Filter cleaning
Suggestions for moves or
prolonged disuse
FOR MODELS WITH AUTOMATIC
LIQUID DETERGENT AND SOFTENER
DOSING SYSTEM:
should you need to tilt or move the
machine, remove the detergent drawer
before
proceeding, keeping it
horizontal so as to avoid any leakage.