Stand on one end of rug and move
cleaner toward other end. Before
reaching edge, push down on handle.
This will lift up the nozzle and will pre-
vent the rug from clinging to the cleaner.
Continue to lift up nozzle so that when
you have reached the edge, it is com-
pletely off the rug. Move cleaner back to
start again, lower nozzle, and use only
forward strokes.
Handle positions
The handle of your cleaner has
three positions:
upright
for storage
and for when using cleaning tools;
oper-
ating
position for general operation on
carpets and floors;
low
for reaching
under low furniture. Step on handle
release pedal (E), then pull handle back
to lower handle.
16
18
Embedded DirtFINDER™
feature (some models)
Cleaning lightweight
flexible rugs
Edge cleaning
Special edge groomers are provid-
ed on both sides of the front of the
cleaner to remove dirt in carpet near
baseboards and furniture.
Guide either side parallel to the edge of
carpet or furniture.
19
Carrying cleaner
The cleaner can be carried by
placing hand under the carrying
handle and lifting.
15
08
With red and green lights, the
DirtFINDER™ system alerts the
user to areas of carpet that may need
more cleaning attention. It is able to
sense when embedded dirt is removed.
The
clean light
(
green) will remain on
throughout cleaning
except
when the
detector senses that a
larger amount of
dirt
is being picked up; then the
dirty
light
(
red)
will come on.
When the
dirty light
is on, you should
take additional cleaning strokes
in the
area until it changes to
clean
.
17
