Hoover U5018, Owner'S Manual

Page: 4 / 12

2. How to use
Cleaner description
13. Nozzle control knob:
slide knob to correct set-
ting for height of carpet
being cleaned
14. Headlight
15. Check bag indicator
16. Bag door
17. Cord clip
18. Hose holder
Operate cleaner only at
voltage specified on data
plate on back of cleaner.
This cleaner is intended for
household use.
1. Handle
2. ON/OFF switch
3. Cord hooks:
wrap cord
around hooks for storage.
Top hook can be rotated
right or left for easy cord
release.
4. Hose
5. Dusting brush
6. Furniture nozzle
7. Crevice tool
8. Carrying handle
9. Wands
10. Final filter
11. Handle release lever:
step on lever to lower
handle to operating or
low positions
12. Furniture guard: helps
prevent cleaner from
marking furniture.
2-2
ON-OFF switch
Plug cord into electrical outlet.
To turn cleaner ON, push switch up.
To turn cleaner OFF, push switch
down.
1
17
2
9
3
18
4
8
14
11
2
7
10
13
12
15
16
5
6
4
Polarized plug
To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not
fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician to install the
proper outlet. Do not change the
plug in any way.
Cord clip
To help keep the cord out of the way
while vacuuming, position cord in
cord clip (A) located on the handle.
A
2-1
Transporting cleaner
To move your cleaner from room to
room, put handle in upright position,
tilt cleaner back on rear wheels and
push forward.
Handle positions
The handle of your cleaner has
three positions;
upright for storage
and when using cleaning tools;
operating position for general
operation on carpet and floors; low
for reaching under low furniture.
Step on handle release lever to
lower handle.
Carrying cleaner
The cleaner can also be moved by
using the carrying handle.
2-3
2-4 2-5