OPERATION
MAINTENANCE
11
10
Using the tools
Emptying the water tank
IMPORTANT:
Accessories can only be attached with the concentration nozzle. Taps should be
turned off when steaming around them. Don’t steam clean ovens, oven surfaces or grills when hot.
Allow to cool to room temperature.
Upholstery cloth
Attach the cloth to the
squeegee tool for use on
upholstery and clothes.
Concentration nozzle
Use to remove soap
scum in baths and
shower enclosures and
to clean stubborn stains
in kitchens.
Brushes
Ideal for any surface
from tiles, sinks, toilets
and oven tops.
Window
squeegee tool
Great for leaving your
windows, tiles and
mirrors gleaming.
Grout brush
Lifts embedded dirt
fromin between tiles.
Detail nozzle
For hard to reach
areas e.g.
around taps.
Scraper tool
Ideal for removing dried
on residue from oven trays,
work surfaces and pans.
CAUTION:
Liquid or steam must not be directed towards equipment containing electrical
components, such as the interior of ovens. Always allow tools and accessories to cool
down before removing.
Press the water tank
release button and pull
tank to remove.
Pull the tab on water
tank cap to open.
Empty any excess water
over the sink.
Clearing blockages
Remove the pin from
the nozzle. Holding
the main body of the
steamer vertically, tap
the nozzle on a hard
surface to release any
mineral deposits.
If there is an
obstruction to the
steam flow through the
machine, steam may
be released through
the bleed valve.
Press the button on the
neck of the machine to
remove the floorhead.
Using the de-scaling
pin, insert the full
length of the pin into
the nozzle. It may be
necessary to twist
the pin to insert fully.
IMPORTANT:
Don’t leave water in the tank between uses, this can effect the steamers performance,
the water tank should to be emptied and rinsed after each use.
TIP:
After connecting the hose, concentration nozzle and tools, check they are securely fitted and
locked into place before turning on.