10
TROUBLe SHOOTING
Should you have any problem with you cleaner, follow this simple check list before calling the Hoover
Customer Service Centre:
A. Cleaner does not switch on
Check if the cleaner is charged.
B. Loss of suction or no suction
Empty the dust container and wash the filter.
Remove nozzle and check for any blockages in the duct.
C.Batteries cannot be charged
This may be a result of very long storage periods (over half year).
Contact Hoover customer service to arrange battery replacement.
If the problem persists contact the Hoover customer service centre.
HOOVeR SPAReS AND CONSUMABLeS
Always replace parts with genuine HOOVER spares. These are available from your local HOOVER dealer or
direct from HOOVER. When ordering parts always quote your model number.
IMPORTANT:
The battery in this cleaner is guaranteed for 6 months from purchase. After 6 months the customer
is liable for the cost of a new battery which will be fitted free of charge by an authorised HOOVER engineer.
CLeANeR MAINTeNANCe
IMPORTANT:
Switch cleaner Off and remove Charger from power supply before removing the bin.
eMPTYING THe BAGLeSS CASSeTTe
a)
Lay the cleaner on a flat surface, pull back the door release button and remove the transparent door.
[8]
b)
Remove the bagless cassette.
[9]
c)
Remove the bin cover by rotating the container and bin cover in opposite directions.
[10]
d)
Empty the debris from the container into a bin.
[11]
Check if it is necessary to clean the relative filters,
as described in the “Maintaining the bagless filters” section.
e)
To refit the bagless cassette and the filters to the product, simply repeat all steps in reverse.
[12]
NOTe:
Hoover recommends to inspect and wash if necessary, the cassette and the filters after each full
container, see maintaining filters section.
MAINTAINING THe BAGLeSS FILTeRS
a)
To access the washable filter, rotate the mesh filter in the opposite direction from the cassette upper
closure and remove the mesh.
[13]
b)
Gently tap filters to release excess dust.
c)
Wipe clean the mesh filter and wash thoroughly the filter from the inside under hand warm water until
the water runs clean.
[14]
d)
Remove excess water by shaking and leave to dry for 24 hours. Refit filters to the cleaner only when
completely dry.
[15]
DO NOT USe HOT WATeR OR DeTeRGeNTS.
IMPORTANT:
Ensure the dust bin, bin cover, filter mesh and filter are fitted well before use.
IMPORTANT:
For optimum performance, always keep your filter clean. We recommend that the
filter should be washed at least once a month.
YOUR GUARANTee
The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold.
Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased.
The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.
Subject to change without notice.
Summary of Contents for SRC144LB
