background image

Full One Year Warranty

(Domestic Use)

Your HOOVER

®

 appliance is warranted in normal household use, in

accordance with the Owner’s Manual against original defects in material
and workmanship for a period of one full year from date of purchase.  This
warranty provides, at no cost to you, all labor and parts to place this
appliance in correct operating condition during the warranted period. This
warranty applies when the appliance is purchased in the United States
including its territories and possessions, or in Canada or from a U.S. Military
Exchange. Appliances purchased elsewhere are covered by a limited one
year warranty which covers the cost of parts only. This warranty does not
apply if the appliance is used in a commercial or rental application.

Warranty service can only be obtained by presenting the appliance to one
of the following Authorized Warranty Service outlets.  Proof of purchase will
be required before service is rendered.

1. Hoover Factory Service Centers

2. Hoover Authorized Warranty Service Dealers (Depots)

This warranty does not cover pick up, delivery, or house calls; however, if
you mail your appliance to a Hoover Factory Service Center for warranty
service, transportation will be paid one way.

While this warranty gives you specific legal rights, you may also have other
rights which vary from state to state (or province).

If further assistance is needed, or if there are questions concerning this
warranty or the availability of warranty service outlets, write or phone the
Consumer Response Center, The Hoover Company, 101 East Maple St.,
North Canton, Ohio 44720.  Phone 216-499-9499.

R4  3-95

U5209-930/15-930/21-930/

Litho USA

56511-245

                   23-930/27-930

THE HOOVER COMPANY, NORTH CANTON, OHIO 44720

In Canada,

 contact Hoover Canada, Burlington, Ontario, L7R 4A8.

Phone 1-800-263-6376

For an automated referral of authorized service outlets in the
U.S.A., phone 1-800-944-9200.

HOOVER and

are registered trademarks

Summary of Contents for Limited
















Reviews: