ROI
Note: The
switch look above the ON/OFF switch, on
upper handle,
holds the switch in the Off position and aids in proper assembly of your
cleaner. Assembly can be continued if the switch lock is missing. However, do
not remove the switch lock until assembly is completed.
Place upper and lower handle sections on a flat surface, aligning rod sections.
Push sections together firmly until they *click” and rod sections lock together.
l
Re
not to press against the gray rod extending
the
lower handle. (Fig. 2)
HANDLE
Insert large rectangular end of
cord into pocket in bottom of handle, with side
marked “UP” visible. (Fig. 2) Make sure rectangular end is pushed into the
handle as far as possible.
cord protector toward upper handle. (Fig. 2)
4
Summary of Contents for Legacy Supreme S2200
Page 1: ...Vacuum Cleaner 1 Read this manual before operating cleaner ...
Page 18: ......