OPERATING INSTRUCTIONS
CAUTION:
The air-intake nozzle and attachments must always be free of obstructions,
otherwise the motor will overheat and could be damaged.
1. Unwind the power supply cord from the cord storage and plug into the power supply
socket outlet.
2. Switch the vacuum cleaner ON by depressing the ON/OFF switch.
3. A suction regulator is located on the hose handle. To activate simply slide the regulator
open to reduce the level of suction required. The suction regulator should be kept in the
closed position.
4. The suction power will reduce and stop as the drum fills up. It is recommended to empty
the drum on a regular basis.
5. To switch the vacuum OFF depress the ON/OFF switch again and then remove from the
mains power supply.
Picking up Liquids
NB:
Before liquids are picked up, always remove the filter bag. If foam develops or liquid
emerges, stop work immediately and empty the drum.
Blow Function.
1. Unwind the power supply cord from the cord storage.
2. Attach the flexi hose to the blow outlet and attach the desired nozzle to the flexi hose.
3. Switch the vacuum cleaner ON by depressing the ON/OFF switch.
4. To switch the vacuum cleaner OFF depress the ON/OFF switch again and then remove
from the mains power supply.
Maintenance, Cleaning and Repair.
1. Disconnect the plug from the mains power supply before cleaning.
2. Take care when emptying the drum, as when full it could weigh up to 24kg.
3. Release the two latches located on the drum in order to remove the motor housing.
4. Empty the drum using the handle grip located on the underside of the drum. Clean with a
warm moist cloth and buff dry. Do not use harsh abrasive or other cleaning aids to clean
the vacuum cleaner.
5. Clean the filter periodically by gently beating it over a rubbish bin. If cleaning is not done
the suction power of the vacuum will decrease.
6. After cleaning the vacuum cleaner, place the motor housing on the drum and secure the
two latches back into place. For correct assembly of motor housing to drum, ensure that
the vacuum inlet and the blower outlet line up vertically.
7. Never spray water over the upper section of the vacuum cleaner
STORING THE APPLIANCE
1. Unplug the unit from the power socket and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
2. Store the appliance in its box or in a clean, dry place.
3. Never store the appliance while it is still wet or dirty.
4. Never wrap the power cord around the appliance.