The side at which the door opens can
be changed, from the left side (as
supplied) to the right side, if the
installation site requires.
Warning!
When reversing the door, the
appliance must not be connected to the
mains. Ensure that the plug is removed
from the mains socket.
Tools you will need:
8mm socket wrench
Cross-shaped screwdriver
8mm wrench
Thin-blade screwdriver
Note:
Before you start lay the
refrigerator on
its
back
in order
to
gain
access
to
the base
,
you
should
rest
it
on
soft
foam packaging
or
similar
material
to
avoid damaging
the
backboard
of
the refrigerator
.
To
reverse
the
door
,
the following
steps
are
generally recommended
.
1. Stand
the
refrigerator
upright
.
2. Remove part
①
and
part
②
from
the refrigerator body, and then take
down part
③
on the door in the same
way. Remove the part screws
④ ,
then
take
off
part
⑤
as
the
picture below.
Note: Please hold the freezer door by hand
during step 2 to prevent door dropping.
3.
Take
off
the door
①
and
place it
on smooth surface with panel upwards.
Screw out the
hinge axis
② (
include
washer
)
as
show
f
igure
Ⅱ
and
Ⅲ
，
and
then
turn
the
upper hinge
fixed board
③
over as
show
f
igure
Ⅳ
.
Finally
fix
part
②
on
part
③
as
show
f
igure
Ⅴ
and
Ⅵ
,
then place it at
side for use
.
Ⅳ
Ⅲ
Ⅵ
Ⅴ
Ⅱ
Ⅰ
①
③
②
①
②
④
①
Upper hinge cover
②
Top cover block
③
④
⑤
Cover plate
Special flange self-
tapping screw
Upper hinge part
③
⑤
9