Hoover HVBN6182BWDK, User'S Operation Manual, Page: 9 / 26

To allow the doors to self-
close, tilt the top backwards
by about 10mm.
●
Reversing the door
The side at which the door
opens can be changed,
from the right side (as
supplied) to the left side, if
trequired.
Warning! When reversing
the door, the appliance
must not be connected to
the mains. Ensure that the
plug is removed from the
mains socket.
Note: If required you may
lay the refrigerator on its
back in order to gain
access to the base
you
should rest it on soft
foam packaging or similar
material to avoid damaging
the backboard of the
refrigerator. To reverse the
door
the following steps
are generally
recommended
1. Stand the refrigerator
upright
Open the upper
door to take out all door
racks and tank(to avoid
damage) and then close
,
,
.
.
≤
10mm
Tools you will need
9
Stop Block
Left Hinge Cover
8mm wrench
8mm socket wrench
Monkey wrench
Thin-blade screwdriver
Cross-shaped screwdriver
2. Remove the upper cover
and corner cover on
the top of the upper door,
then remove right hinge
cover
and hinge cover
and block cover on
top of the cabinet.
① ②
③
④, ⑤
Door racks
Water tank