EN-28
When you have installed the hob, make sure that
•
the power supply cable is not accessible through cupboard doors or drawers
•
there is adequate flow of fresh air from outside the cabinetry to the base of the
hob
•
if the hob is installed above a drawer or cupboard space, a thermal protection
barrier is installed below the base of the hob
•
the isolating switch is easily accessible by the customer
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.
Adjusting the bracket position
Fix the hob on the work surface by screw 4 brackets on the bottom case of hob
(see picture) after installation.
A
B
C
D
Screw
Bracket
Screw hole
s
Beottom ca
