3.2 Functions
Setting key
LEDl
LED2
LED3
LED4
LEDS
LED6
r--7
-16'C
-18'C
-24'C
8�
5�
n
SETTING
L___J
TEMP.CONTROL
L SUPER FREEZE _J
L
SUPER COOL
_J
(The picture above is only for reference.The actual configuration will depend on the physical product
or statement by the distributor)
1. When the power is on for the first lime, full display shall last for 3 seconds, then enter into the
normal operation display;
(When the power is on for the first time, the setting temperature of refrigerator and freezer is 5
°
(/-
18
0
( respectively)
When there is a fault, the fault code is displayed; when there is no fault, the setting range of the
refrigeration compartment is displayed.
The display screen is always on when the door is open while the display screen is always off when
the door is closed;
2. Key operation
After each key operation of temperature adjustment , the corresponding set temperature flashes for
3S;
�
In the refrigeration temperature setting mode, long press the setting key
TEM�o,
for 3S to switch to
the freezing temperature selling mode;
r--i
In the freezing temperature setting mode, long press the setting key
�
for 3S to switch to the
refrigeration temperature setting mode;
TEMe.coN .. o,
3. Locking and unlocking
The locking state shall be automatically entered after 30 seconds without key operation;
No manual lock/unlock settings;
4.When setting the refrigerating temperature, the temperature will cycle in the following order each
lime the setting key is pressed. In the super cool state,
LED4
and LED6 will light up at the same
ti meas shown below:
s't----. a't ----.
SUPER COOL
---,
1
7
