7
8
MAINTENANCE
FAQs
Important:
The unit must be unplugged from the mains socket outlet after use, and before cleaning
or maintaining the unit.
The brushes and
scouring pads can
be washed under
the tap with warm
water (40ºC MAX).
Please leave to air
dry for 24 hours. It is
recommended to
re-shape the pads
whilst drying.
Cleaning the floor pads
The polishing head
unit is not suitable for
washing in water, it
must be wiped with
a damp cloth. Please
ensure polishing head
is fully dry before
re-use. Do not
submerge in water.
Is there an accessory missing?
• Check the ‘Machine Overview’ page in this guide to make sure the part is definitely included
in your unit. If it’s missing, please contact your local Hoover service agent.
Why will the Floor Polisher not run?
• It may not be plugged into the electrical outlet correctly; ensure that the plug
is pushed in securely.
• The electrical outlet may not be working properly; check the fuse or breaker,
or consult an electrician.
Why are smear marks made on floor when polishing?
• Make sure the polish/wax been allowed to dry.
• Consider removing existing floor treatment.
Why is there no gloss sheen after polishing?
• Floor polish/wax application level may need to be increased, try another coat. Allow to dry
and re-polish.
• Please note some types of floor do not produce gloss finish.
Why are there scratches being made on the floor?
• Check for grit or dirt stuck to the pads or on the rear wheels.
• Clean/replace the pads or wipe the wheels free from debris.
Why is the floor too slippery?
• Check the polish/wax is designed to be used on floors. Good floor polish should always
produce a glossy but grippy finish.
What do I do if the unit becomes damaged or broken?
• Contact your local Hoover service agent.
All pads and floor attachments are washable.
40˚ C max
