Hoover HEDS 1064-80 Instruction Manual Download Page 11

9

Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed
to use the abrasive agent or some paper towel becauseof the risk of scratching or leaving spots on the stainless steel surface.

To clean the edge around the door, you should use only a soft warm, damp rag. To prevent
penetration of water into the door lock and electrical components, do not use a spray cleaner
of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will
scratch the finish. Some papers towels can also scratch or leave marks on the surface.

After every wash, turn off the water supply to the

appliance and leave the door slightly ajar so that

moisture and odors are not trapped inside.

Before cleaning or performing maintenance, always

remove the plug from the socket. Do not run risks.

To clean the exterior and rubber parts of the dishwasher,

do not use solvents or abrasive cleaning products.

Rather, use only a cloth and warm soapy water.

To remove spots or stains from the surface of the

interior, use a cloth dampened with water and a little
white vinegar, or a cleaning product made specifically

for dishwashers.

When you go on holiday, it is recommened that you run a

wash cycle with the dishwasher empty and then remove

the plug from the socket, turn off the water supply and

leave the door of the appliance slightly ajar. This will help

the seals last longer and prevent odors from forming

within the appliance.

If the appliance must be moved, try to keep it in the vertical

position.If absolutely necessary, it can be positioned on

its back.

One of the factors that cause odors to form in the

dishwasher is food that remains trapped in the seals.

Periodic cleaning with a damp sponge will prevent this

from occurring.

Summary of Contents for HEDS 1064-80
















Reviews: