Hoover HDIN S Series, Manual

Page: 25 / 44

EN
25
Proceed as follows to change or cancel a
running program:
l
Open the door.
l
Keep the START/RESET button pressed
for at least 3 seconds. "RESET" will
appear on the display and acoustic
signals will be emitted.
l
The running programme will be cancelled.
l
At this point a new programme can be set
using the
"Progr." button.
A 5 second buzzer will sound (if not muted)
3 times at 30 second intervals to signal that
the programme has ended.
In some programmes (see table of programmes),
the third washing arm,
positioned at the
bottom of the dishwasher
POWER WASH
,
will also be enabled. This feature is ideal
when cleaning heavily soiled tableware or
cookware, placing them directly in the area
of the basket above the
POWER WASH
arm.
POWER WASH
The option buttons provide you with further
wash options, allowing you to customise the
wash programmes (see the table in chapter
17 for a list of programmes on which each
option can be enabled). Options are
enabled (or disabled) before starting the
programme, using the appropriate buttons.
The relevant indicator lights will appear (or
disappear) on the display.
The option button should be enabled after
you have chosen the wash programme.
"Express" button (only on some models).
This button enables average energy and
time savings of 25% (according to the cycle
selected), reducing the wash water
temperature and the drying time during the
final rinse. This option is recommended for
evening washing when perfectly dry dishes
are not needed immediately. For better
drying, leave the dishwasher door slightly
ajar to promote natural air circulation in the
dishwasher.
WARNING:
If you open the door during the drying
cycle, an intermittent audio signal
advises you that the drying cycle has
not yet finished.
Changing a running programme.
WARNING:
Before starting a new programme, you
should check that there is still detergent
in the dispenser. If necessary, top up the
detergent.
Programme end
Only for models with the "OPEN DOOR"
option, during the drying phase the
door will open automatically and you
will have to wait until for the end-of-
cycle signal before removing the dishes.
POWER WASH
(only on some models)
Option buttons
If an option is selected that is not
compatible with the selected programme
then the option indicator light first flashes
and then goes off.