9
AFTER STEAM CLEANER USE/USING COOLING TRAY
After using Steam Mop and to avoid damage
to your floors, unplug and place Steam
Mop in Cooling Tray (2.21) until product
cools. Once steamer has cooled, remove
Microfiber Pad and follow maintenance
instructions on page 10 to avoid mold and
mildew.
REFRESHING CARPET
Use steam alone. Do not use cleaning solution.
Turn Solution Control dial to “STEAM ONLY”.
The steam cleaner will take roughly 30
seconds to be ready to produce steam. Once
steam is ready to be produced, the green
“steam ready” indicator will illuminate.
Place the steam cleaner into the Carpet Glider
(2.17).
To recline the steam cleaner place foot on Mop
Head and gently pull handle backwards (2.18).
To produce steam squeeze the Steam Trigger
(2.19).
Move the Steam Mop slowly backwards
and forwards across the floor (2.20) paying
particular attention to high traffic areas.
NOTICE:
The Carpet Glider does not stay attached
to the mop, it is designed in this way.
IMPORTANT
When using on carpets, always ensure the multi-
surface Microfiber Pad is properly attached to
the Mop Head.
!
WARNING
!
Do not clean over floor electrical outlets.
Do not use steam cleaner or press the Steam
Trigger without water in the water tank.
2.17
2.18
2.19
2.20
2.21
