34
When the bowl is full raise the end of the drain pipe to a height higher than the
top of the appliance to stop the flow of water. Empty and replace the bowl and
continue draining the machine until empty.
4. Once the machine is fully drained of water, clip the hose to the rear of the
machine. Press the door button and remove the load.
The door can be opened approximately 2 minutes after the power failure by simply
pressing the door button. Do not force open the door.
Important: the water and the load may be very hot!
Technical data
•
Max. load of dry laundry
5kg
•
Water pressure
(0.5-8 bar)
0.05-0.8 MPa
•
Spin speed
1600 rpm
Measurements
•
Width
60cm
•
Depth
54cm
•
Height
85cm
NB: For specifications regarding electrical data, see the data plate on the front of
the washing machine (door area). You will also need to refer to the information on
the data plate should you need to contact the GIAS Service for any advice.
05651238.qxd 29-05-02 10:10 Page 34