background image

M) 

N.B!

If the appliance is installed on a carpeted floor ensure that the ventilation holes on the
base of the appliance are not obstructed.

N)  If the appliance is not running properly or breaks down, switch it off, turn off the tap and do

not tamper with the appliance.
Consult only the Authorised Technical Support Service for possible repair and ask them to 
use original spare parts.
Failure to comply with the above can compromise the safety of the appliance.

O) If the appliance’s power cable should ever need replacing, consult the Authorised 

Technical Support Service  

Quick start

Washing

-  Open the door by using the handle “A” (Fig. 1, page 6)
-  Select laundry and put it in the machine
- Close 

the 

door

-  Put detergent in the compartments as indicated in the programme guide in this instruction

manual

-  Switch on the appliance by the ON/OFF button
-  Select the required programme 
-  The display will show the settings for the programme selected.
-  Adjust the wash temperature if necessary.

Press additional function buttons (if required)

-  Press the “Start/Pause” button
-  The programme starts.

After washing
-     The word “End” will appear on the display. 
-     Wait for the door lock to be released 

(about 2 minutes after the programme has finished).
The “Door Security” indicator light will go out.

Switch off the appliance by pressing the ON/OFF 
button

-     Open the door and remove the laundry.

Ensure that the machine is correctly installed in line with the instructions found on page 29.

General delivery notes

Please check that the following items are delivered with the appliance:
-   Instruction manual
-   Certificate of guarantee
-   Inlet hose
-   Liquid detergent or liquid bleach compartment
Check that no damage has occurred during transit, and if so, call your nearest Authorised
Technical Support Service agent.

Safety notes.

Note:
for cleaning or maintenance of the washing machine.

A) Pull out the plug
B) Turn off the tap
C) 

Hoover

equips all its appliances with earthing. Ensure that the mains supply is earthed,

and if it is not, seek assistance from a qualified person.

D)  Do not touch the appliance when hands or feet are wet or damp. Do not use the appliance

with bare feet.

E)  The use of adapters, multiple connectors and/or extensions is not recommended.

Note:
water temperature can reach 90°C during the wash cycle.

F)  Check there is no water left in the drum before opening the door.
G) This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a  person 
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

H) Do not pull the power cable or the appliance itself to remove the plug from the socket.
I)  The appliance must not be exposed to weather conditions (rain, direct sun, etc...)
L)  When moving the appliance never lift it by the controls or by the detergent drawer.

When in transit never rest the door against the trolley or transport the appliance without

the polystyrene base.

4

5

Summary of Contents for DYNAMIC STEAM 10+


















Reviews: