2
GETTING TO kNOw yOUR ClEANER
A. Cleaner main body
B. Dust Container
C. Dust Container Release Button
D. Dust Container Door Release Button
E. On/Off Button
F.
Cord Rewind Button
G.
Handle
H. suction Regulator*
I.
Telescopic Tube
J.
Telescopic tube adjuster
K. Parking slot
L.
Carpet and Floor nozzle (
GP
)**
M. Floor Type selector Pedal**
n. Hose
O. Pre motor Filter
P. Multi-cyclonic separation Unit
Q. Dust Bin
R. Exhaust Filter
s. Accessories holder
T.
2 in 1 Accessory
U. Furniture nozzle
V.
Parquet Nozzle*
W. Pet Hair Remover Mini Turbo nozzle*
X. Allergen Remover Mini Turbo nozzle*
Y.
Grand Turbo Nozzle*
ASSEmblING yOUR ClEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release: simply press the button on the hose end and pull.
[2]
2. Connect the tube upper end to the hose handle.
[3]
3. Attach the accessory holder to the the telescopic tube and store the accessories on
the holder.
[1]
4.
Connect the tube lower end to the carpet and floor nozzle.
[4]
*Certain models Only
** Certain models only, nozzles may vary according to model
USING yOUR ClEANER
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker.
[5]
2. Adjust the telescopic tube to the desired height by moving the telescopic release
button up and raise or lower the handle to the most comfortable cleaning position.
[6]
3. Carpet and Floor nozzle** - select the type of surface to be cleaned by pressing the
pedal** in the nozzle.
[7]
Hard Floor
– Brushes are lowered to protect the floor.
Carpet
– Brushes are raised for the deepest clean.
4. switch the cleaner on by pressing the On/Off Button on the cleaner main body.
[8]
5. Adjust the suction by moving the suction regulator to the desired level.*
[9]
6. switch off at the end of use by pressing the On/Off Button. Unplug and press the
cord rewind button to wind the power cord back into the cleaner.
[10]
7. To store your cleaner adjust telescopic tube to the lowest height setting and park the
nozzle in the parking slot on the cleaner main body.
[11]
ACCESSORIES ANd NOzzlES
To obtain the best performance and energy efficiency
#1
it is recommended that the
correct nozzles are used for the main cleaning operations. These nozzles are indicated
in the diagrams by the letters
GP
,
HF
or
CA
.
A nozzle type
GP
can be used to clean both carpet and hard floor.
A nozzle type
HF
is suitable for use only on hard floor.
A nozzle of type
CA
is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended
for occasional use only.
It is important to note that this vacuum cleaner is supplied with an Energy Label as
required by European Regulation (EU) 665/2013.
If the label shows a red prohibition circle on the left covering the carpet symbol, then this
indicates that the vacuum cleaner is not suitable use on carpets.
If the label shows a red prohibition circle on the right covering the hard floor symbol, then
this indicates that the vacuum cleaner is not suitable for use on hard floors.
#1
NOTE:
Dust pick up ability carpet, dust pick up ability hard floor, and energy efficiency
in accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.
All accessories can be fitted to the end of the hose handle or to the end of the telescopic tube.
2 in 1 tool
– Combines several functions in one.
[12]
L1. Carpet nozzle (
CA
)**
L2. Hard Floor nozzle (
HF
)**
