3
*Certain Models Only
**May vary according to the model
GETTING TO KNOW YOUR CLEANER
GB
A. Accessory Door
B1. Hose Holder*
B2. Handle Holder*
B3. Tube Holder*
C. Variable Power Control*
D. Bag Door
E. Bag Door Latch
F. On/Off Pedal
G. Bag Check Indicator
H. Accessory Door Latch
I. suction Regulator
J. Hose
K. Telescopic Tube**
Ka. Telescopic Tube Latch*
Kb. Telescopic Tube Adjuster**
L. Nozzle Latch*
M. Hard Floor Nozzle**
N. Carpet & Floor Nozzle*
O. Battery Release Pedal
P. Battery Pack
P1. LED Lights Battery Indicator
P2. Battery Charge status Button
P3. Charging port
Q. Charger
R. Bag
s. Exhaust Filter
T. Pre-Motor Filter
U. Bag Holder
V1. Crevice Tool*
V2. Dusting Brush*
V3. Furniture Nozzle*
W. Parquet Nozzle*
GETTING TO KNOW YOUR CLEANER
Remove all components from the packaging.
1.
Connect the hose to the cleaner main body. To release the hose, simply press the two
latches on the hose end and pull.
[1]
2.
Connect the hose handle to the upper tube end.
[2]
3.
Connect the tube lower end to the hard floor nozzle** or accessories if required.
[3]
4.
Insert the battery pack by pushing it into the cleaner slot ensuring it is fixed in position,
you will hear a click when fully connected.
[4]
To remove the battery pack, press the
battery release pedal on the cleaner and take it out.
CHARGING THE BATTERY PACK AND USE
For first use, charge the battery pack for 5.5 hours.
To charge the battery pack, detach it from the cleaner by pressing the battery pack
release pedal
[5a]
and plug the charger into the charging port located on the battery
pack. The battery pack can also be charged when it is inserted into the cleaner.
[5b]
When the charger is connected, the LED lights battery indicator on the battery pack will
illuminate in turn as the battery charges, until all four lights are illuminated.
Once fully charged, the four LED lights will remain lit and will turn off after 5 minutes.
IMPORTANT:
The cleaner on/off pedal must always be in the OFF position during charging.
LED LIGHTS BATTERY INDICATOR:
○○○●
<15%, flashing
○○○●
15%~25%
○○●●
26%~50%
○●●●
51%~75%
●●●●
76%~100%
IMPORTANT: Always ensure battery has sufficient battery capacity before use.
Charge your cleaner if one LED light is flashing (remaining capacity≤15%).
When the cleaner is in use, the LED lights battery indicator will illuminate indicating how
much charge is remaining.
When the battery charge level is ≤15% , the first LED light will flash for 5 seconds before
the cleaner will automatically switch off.
When the cleaner is not in use, the battery level can be checked by pressing the Battery
Charge status Button
(P2). The LED lights battery indicator will remain lit for 5 seconds.
IMPORTANT:
1.
Use only the charger supplied with your cleaner.
2. Charge temperature: 0~45°C.
3. When charging the cleaner, it will automatically turn off.
4. It is normal for the charger to become warm when charging.
5. Unplug the charger in the event of prolonged absence (holidays, etc.).
NOTE:
To optimise the battery performance you should fully charge the battery pack on a
regular basis or at least once per year
.
USING YOUR CLEANER
1. Adjust the telescopic tube to the desired height by moving the telescopic tube
adjuster** and raise or lower the tube to the most comfortable cleaning position.
[6]
2. Connect the telescopic tube lower end to the Hard Floor nozzle** or accessories,
if required. In case the model is equipped with a Carpet and Floor Nozzle**, press
the floor type selector* pedal on the nozzle to select the ideal cleaning mode:
[7]
Hard Floor – Brushes are lowered to protect the floor.
Carpet –
Brushes are raised for the deepest clean.
Carpet & Floor Nozzle* :
- Hard floor Cleaning:
Press the pedal on the nozzle on Hard Floor mode and
adjust the slider on the nozzle on ALL FLOORs. In this position brushes, wheels
and wiper blade are lowered to protect hard floors.
[8a]
- Standard Carpet & Rugs Cleaning:
Press the pedal on the nozzle on Carpet
