Hoover Air Mini, Quick User Manual

Page: 4 / 11

Emptying and cleaning the dirt container
TAP
Press dirt container release button
to remove the dirt container.
Hold dirt container over a bin and
press dirt release button to open,
allowing dirt to fall out.
To remove the inner shroud,
hold the container and rotate the
shroud clockwise.
Hold the container and turn the
inner separator anti-clockwise.
WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
IMPORTANT: Filters need to be cleaned every time you empty the dirt container for best cleaning results.
Do not use your vacuum cleaner without all of the filters in place.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat,
the thermostat will automatically turn the unit off.
Cleaning the pre-motor filter
Hold the dirt container and twist
the lid anti-clockwise.
Lift the lid to reveal the
pre-motor filter.
Lift out the pre-motor filter.
Tap excess dirt from the filter rinse under a tap and leave to dry for 24 hours.
2 1
3
!
40C Max
5
24hr
6
4
4
Post-motor filter is located in the
right side wheel. Hold the centre
of the wheel and twist wheel cover
anti-clockwise.
With the wheel cover off the post-
motor filter is easily removed.
Tap all excess dirt off the filter.
Do not wash.
1 2 3
Cleaning the HEPA post-motor filter
5 6
Looking After Your Machine – Filters Looking After Your Machine – Filters