Hoover A 089, User Instructions, Page: 12 / 17

EN
preliminary removal of stains can be carried out in the
washing machine. Pour the bleach into the special
compartment and set the knob (L) on the special
programme “PRE-WASH STAIN REMOVAL”
.
When this phase has terminated add the rest of the washing
and proceed with a normal wash on the most suitable
programme.
It is advisable not to wash a load made up entirely of articles
in towelling fabric which absorb a lot of water
and become too heavy.
The maximum load for heavy fabrics is 5 kg, while, in the case
of delicate fabrics, it is advisable not to exceed 2 kg (1 kg in
the case of machine washable articles in “Pure New Wool”)
so as to avoid the formation of creases which may be difficult
to iron. A net bag should be used for particularly delicate
fabrics.
EXAMPLE:
The advice of Hoover is set out in the washing programme
table:
● Ensure that article labels carry the indication 60°C.
●
Open the door by pressing button (B).
●
Load the drum with a maximum of 5 kg. of dry washing.
●
Close the door
IMPORTANT:
WHEN SETTING THE PROGRAMME ENSURE THAT THE
ON/OFF BUTTON IS NOT TURNED ON.
Select programme 2:
Choose the programme by rotating the knob (L) in a
CLOCKWISE DIRECTION and make the number of the
programme coincide with the sign.
●
Move the temperature knob (I) to maximum 60°C.
●
Open the detergent drawer (A).
23
cl
5 kg max
OK
60° max
EN
CHAPTER 11
CUSTOMER AWARENESS
A guide environmentally friendly and economic use of your
appliance.
MAXIMISE THE LOAD SIZE
Achieve the best use of energy, water, detergent and time by
using the recommended maximum load size.
Save up to 50% energy by washing a full load instead of 2 half
loads.
DO YOU NEED TO PRE-WASH?
For heavily soiled laundry only!
SAVE detergent, time, water and between 5 to 15% energy
consumption by NOT selecting Prewash for slight to normally
soiled laundry.
IS A HOT WASH REQUIRED?
Pretreat stains with stain remover or soak dried in stains in water
before washing to reduce the necessity of a hot wash
programme.
Save up to 50% energy by using a 60°C wash programme.
WASHING
VARIABLE CAPACITY
This washing machine automatically adapts the level of the
water to the type and quantity of washing. In this way it is also
possible to obtain a “personalized” wash from an energy
saving point of view.
This system gives a decrease in energy consumption and a
sensible reduction in washing times.
Let us suppose that the washing consists of HEAVILY SOILED
COTTON (tough stains should be removed with the special
cream). When only a limited number of articles have stains
which require treatment with liquid bleaching agents,
22
OK