16.
Maintenance
(continued)
Changing the Motorised Powerhead Drive Belt
WARNING: To reduce the risk of electric shock, ensure that
the power is switched off and the power plug is disconnected
from the power supply before performing any cleaning,
maintenance or troubleshooting checks. Failure to do so may
result in electric shock or personal injury.
CAUTION! The powerhead, hose and rod contain electrical
connections. The powerhead, hose and rod are not
serviceable parts. Please return the product to your nearest
Godfreys store if the powerhead, hose and/or rod are faulty.
Depending on frequency of use, the motorised powerhead drive belt will
occasionally require replacing.
1. Disconnect the powerhead from the telescopic tube.
2. Turn the powerhead upside down and turn the three locking rods
anti-clockwise to unlock the bottom plate.
Cleaning the Motorised Powerhead
The rotating brush must be free of debris for effective cleaning and for maximum suction. Disconnect
the motorised powerhead and turn it over to inspect the rotating brush. If a build-up of debris is wound
around the rotating brush, remove by carefully cutting with scissors. Avoid damaging or cutting the
bristles.
WARNING! Ensure that the cleaner is disconnected from the power supply when
performing any maintenance procedures.
