Hooker Furniture Four-Drawer Thin Console-Ebony 3005-85001 Assembly Instruction Download Page 2

Page: 2 / 2

2/2

Assembly Steps:

1. Drill two holes into the wall using 1/4”drill bit at the desired place you want to set the Console

and insert the Plastic Anchors (C).

2. Screw the Hook (D) into the Plastic Anchor (C). Check and make sure the Plastic Anchor (C) is

securely held in the wall.

3. Hang the metal rings onto the Hook (D) and set the Console in place.

Above hardware is packed in the plastic bag with the instruction sheet.

Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a
damp cloth.

Polish the finish with soft cloth and an industry recognized furniture polish.

Summary of Contents for Four-Drawer Thin Console-Ebony 3005-85001

Page 1: ...2 2 D BOLT ALLEN WRENCH PLASTIC ANCHOR HOOK A B E F E G G F Assembly steps 1 Place the top upside down on a soft surface 2 Attach the post E to the top F secure by turning in a clockwise direction Se...

Page 2: ...C Check and make sure the Plastic Anchor C is securely held in the wall 3 Hang the metal rings onto the Hook D and set the Console in place Above hardware is packed in the plastic bag with the instru...