Note:
1. Leaves cannot be switchable. Follow numbers on leaves and top when assemble.
2. Height of this table can be adjusted with or without the extension blocks.
Assembly steps with extension blocks:
1. Tighten extension blocks (G) on posts by inserting bolts (E), lock washers (C) and flat
washers (D), sure bolts with allen wrench (A) in clockwise direction. (See Diagram 1)
2. Screw posts (H) to bases (F) by using bolts (E), lock washers (C) and flat washers (D),
secure with allen wrench (A) in clockwise direction. (See Diagram 2)
3. Attach stretcher (K) to bases with bolts (E), lock washers (C) and flat washers (D), sure
all by allen wrench (See Diagram 3)
4. Attach mounting plate (I) to post by using bolts (B), lock washers (C) and flat washers
(D), tighten all with allen wrench (A). (See Diagram 4)
5. Place table top (J) upside down on a soft surface to prevent it from being scratched.
Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert
bolts (B), lock washers (C) and flat washers (D), tighten bolts by turning with allen
wrench (A) in clockwise direction. (See Diagram 5)
6. Turn table upright.
Assembly steps without extension blocks:
1. Remove extension blocks from posts directly, then assemble table as the above steps.
(See Diagram 6 & 7 & 8 & 9)
Diagram 6
Diagram 7
Diagram 8
Diagram 9
2/3
