2/2
3. Place table top (L) upside down on a soft surface to prevent it from being scratched.
Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert
bolts (C), lock washers (B) and flat washers (A), tighten bolts by turning with allen
wrench (D) in clockwise direction (See Diagram 2).
4. Turn table upright.
Instruction for table leaves:
1. There are latches at the bottom of table top, turn off the latches as shown in Diagram 2.
2. Pull out table top as the arrow direction shown in Diagram 3.
3. Place table leaves between and push table tops together.
4. Turn on latches. (see Diagram 2)
5. Take opposite actions to remove table leaves.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 2
Diagram 3
