3/5
3. Attach right end panel on the top of Hutch with 2 flat washers (A), 2 lock washers (B), 2
bolts (H) in the center and with 1 flat washer (A), 1 lock washer (B), 1 bolt (C) in the front.
Tighten all bolts securely with allen wrench (D). (See diagram 3)
Diagram 4
4. Screw bottom back rail and top back rail to left and right end panels by using 4 flat
washers (A), 4 lock washers (B) and 4 bolts (I), tighten all bolts securely with allen wrench
(D). (See diagram 4)
Diagram 5
5. Place the Hutch upright and face front. Fix the wiring of touch switch on the inside of front
right post with 2pcs of clips (M) and 2pcs of screws (L), and install the touch switch (E) with
2pcs of screws (L). (See diagram 5)
