2/3
Assembly steps:
1. Insert 2 bolts (H) into holes of each post on Headboard (A) and Footboard (B), attach the ends of
side rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten nuts (E)
securely with spanner wrench (F). (See Diagram 1)
Note: Please make sure the ends of side rails with rails must be placed on top when assembling 6/0
upholstered rails. (See Diagram 6)
2. Take out center supports (L) from the rail box. Attach center supports (L) to slats (D) by using 2 bolts
(Q), 2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R). (See
Diagram 2)
3. Attach slats (D) to side rails (C), align pre-drilled holes on the slats to holes on the cleats of side
rails(C), using screws (K) to tighten both. (See diagram 3)
Diagram 1
Diagram 2
Diagram 3
Diagram 6
