2/4
There are 2 hardware bags.
One is to assemble the K/D posts to HB panel which is attached at the back of HB.
One is to assemble side rails to HB&FB which is in the box of side rails.
Please note.
Assembly steps:
1. Attach two side posts (T) to each side of the back of headboard (A) using bolts (N), lock washers (O)
and flat washers (P). Secure bolts (N) by allen wrench (M) as shown in diagram 1. Then attach the
middle post (T) to the center of headboard (A) in the same way. (See Diagram 1)
2. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the end of
side rails (C) to bolts (H) on posts using 2 curved washers (G)and 2 nuts (E), tighten nuts (E) securely
with spanner wrench (F). (See diagram 2)
Note: Please make sure the end of side rail with rail must be placed on top when assembling 6/0
upholstered rails.
GE F
A
H
C
Diagram 2
3. Take out center supports (L) from the rail box, attach center supports (L) to slats using 2 bolts (Q),
2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R). (See
diagram 3)
