2/2
A
B
C
A
B
C
A
B
C
H
You will adjust the bolts under the top when the leaves are not keep level with the top, the steps for
adjusting the leaves lower and higher in order to keep it level with the top as below (See Diagram 6)
1. Loosen bolts on the front of metal block.
2. Adjust bottom screws to raise and lower that side of the leaf.
3. Tighten bolts to hold adjustment block in place.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and
water solution. Polish the finish with soft cloth and an industry recognized furniture polish.
Instruction for the leaves:
1. Pull out the leaves as the arrow direction
as shown in diagram 3.
2. Lift the leaves up and make them 1/2”
higher than the center top.(See diagram 4)
3. While holding leaf up push all the way in
first and lay down the leaves as shown in
diagram 5.
Diagram 3
Diagram 5
Diagram 4