1/2
ASSEMBLY INSTRUCTION
Item#: 3005-75005 Refectory Base-Ebony
3005-75006 Refectory top-Drift
***Please make sure you have all the parts indicated below prior to assembly.
This unit is heavy and can best be assembled with the help of two or more people.
HARDWARE LIST
E
D
F
G
LOCK WASHER
1
12
12
12
H
69*27.2*4mm ALLEN WRENCH
73*29*5mm
ALLEN WRENCH
1
Q'TY
NO
50mm BOLT
FLAT WASHER
It is very important to add the correct washer.
and lock was (F & G)If not it will allow the bolt to go too far
This will limit the leaf travel and cause issues
with the function of this leaf.
C
B
A
G
F
E
D
1. Place the top (A) upside down on a soft surface;
2. Attach the pedestal (B) to the top (A), align the
holes on the pedestal and the top ,insert 1pc bolt (E)
with 1pc lock washer (F) and 1pc flat washer (G) into
each hole;
3. Secure the bolt (E) in clockwise direction with
allen wrench (D) (see diagram 1);
4. Attach the other pedestal in the same way as step
2 and step 3;
5. Place rail (C) onto two pedestals (B);
6. Insert 1pc bolt (E) with lock washer (F) and flat
washer (G) into holes in rail (C) and corresponding
holes in pedestal (B);
7.
Secure the bolt (E) with allen wrench (D);
8. Turn the table upright (see diagram 2).
Diagram 1
Diagram 2