3/3
1.
Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the ends of side
rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten nuts (E) securely with
spanner wrench (F). (See diagram 4)
Diagram 4
2. Take out center supports (L) from the rail box, attach center supports (L) to slats (D) by using 2 bolts (Q),
2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R). (See diagram 6)
Diagram 6
3. Attach slats (D) to side rails (C), align pre-drilled holes on the slats to holes on the cleats of side rails (C),
using screws (K) to tighten both. (See diagram 3)
Diagram 3
Note: You can change the height of slats by adjusting the height of cleats on side rail as shown in diagram 4.
Remove bolts (I), lock washers (O) and flat washers (J) from the cleats by turning the bolts (I) with allen
wrench (M) in anti-clockwise direction. Adjust the cleats to a desired position, and then secure lock
washers, flat washers, bolts in clockwise direction by turning with allen wrench.
