Instruction Manual hoogo S3
Rectification of faults
43
Problem
Possible cause
Solution
The appliance
cannot be
switched on.
The rechargea-
ble battery is fully
empty.
Switch the ap-
pliance off and
charge the
rechargeable bat-
tery („3.3.4 Charg-
ing the recharge-
able battery“ on
page 32).
The brush roller
rotates slowly
and/or unevenly.
The brush roller is
soiled.
Clean the brush
roller regularly („5.3
Cleaning the brush
roller“ on page
40).
The appliance
cannot be
charged. The LEDs
are not lit.
The mains adapt-
er is not correctly
inserted.
Check whether
the mains adapt-
er plug and the
mains adapter are
correctly in their
sockets.
The rechargea-
ble battery is not
correctly inserted
in the appliance.
Disconnect the
mains adapter
and check wheth-
er the recharge-
able battery is
correctly placed in
the appliance. Re-
connect the mains
adapter.
The appliance may only be used if it is fully in order.
If the appliance or part of it is faulty, it must be
decommissioned and expertly repaired or disposed of.
Try to rectify minor faults yourself. Observe the pertinent
safety regulations in the operating instructions here.
If the fault cannot be rectified, decommission the
appliance and inform the manufacturer’s qualified staff
for fault rectification (International Services” on page 1).
The following table shows an overview of the most
important faults as well as their possible causes and
rectification measures.
