_________________________________________________________________________________________________
______________________________________________________________________________________
U426_flowtherm Ex_B_e_171206
11/34
5.2
Setup menu after switch on
Menu
Settings
Sensor
FA input
Basic settings 5.3.1
Type 5.3.1.1
Range 5.3.1.2
Material 5.3.1.3
Directional sensing 5.3.1.4
Measurement settings 5.3.2
Medium 5.3.2.1
Section 5.3.2.2
Profile factor 5.3.2.3
Damping 5.3.2.4
Density correction 5.3.3
Operating conditions 5.3.4
Service temperature 5.3.4.1
Working pressure 5.3.4.2
Standard conditions 5.3.5
Standard temperature 5.3.5.1
Standard pressure 5.3.5.2
Standard density 5.3.5.3
Pairs of values 5.3.6
VA input
Basic settings 5.3.7
Type 5.3.7.1
Measurement settings 5.3.8
Section 5.3.8.1
Profile factor 5.3.8.2
Damping 5.3.8.3
Operating conditions 5.3.9
Service temperature 5.3.9.1
Working pressure 5.3.9.2
Standard conditions 5.3.10
Standard temperature 5.3.10.1
Standard pressure 5.3.10.2
Standard density 5.3.10.3
Pairs of values 5.3.11
TA input
Basic settings 5.3.12
Type 5.3.12.1
Measurement settings 5.3.13
Section 5.3.13.1
Profile factor 5.3.13.2
Pressure 5.3.13.3
Damping 5.3.13.4
Standard conditions 5.3.14
Standard temperature 5.3.14.1
Standard pressure 5.3.14.2
Standard density 5.3.14.3
Pairs of values 5.3.15
Pt100 input
Unit 5.3.16
Analog input 5.3.17
