Operating Instructions
9
2.6.
Organisational measures
The functions of all the existing safety equipment must be inspected regularly
before the start of work or of each new shift. Look for outwardly visible damage.
2.7.
Informal safety measures
In addition to this user’s manual, the generally and locally applicable accident
prevention and environmental protection regulations must be made available and
observed.
2.8.
Duties of personnel
Persons who are assigned the task of working on and with the UVAHAND LED
undertake to do the following before starting work:
to observe the occupational
safety and accident prevention
regulations
to read the chapter on safety and
the warnings printed in this man-
ual and to observe them at all
times while using the equipment.
In particular, the safety meas-
ures in DIN EN 62471: 2008
("Photobiological safety of lamps
and lamp systems") must be ob-
served.
2.9.
Dangers from Handling the Unit
The UVAHAND LED is constructed in accordance with the technological state of
the art and generally accepted safety engineering practice.
Nevertheless, certain hazards may arise when handling the unit, for example:
Danger from electrical current
Danger from UV radiation
Thermal hazards
The equipment may only be used under the following conditions:
The device must always be held in such a manner that no direct radia-
tion can strike the user or other persons.
In order to protect against indirect scattered radiation, if necessary (in
case of strongly reflective surfaces) personal protective equipment must
be worn to protect the eyes and skin.
All points in the chapter on intended use must be complied with.
With regard to safety, the device is in flawless condition
DANGER!
Improper use may endanger the health of the user or third parties
(severe skin or eye damage)!
It may also cause damage to the device or other material damage.
Organisational
Measures
Informal
safety meas-
ures
Obligation of
personnel
Dangers from
handling the
unit
