148
149
150
151
152
E02
Pass the light wire from the
boat through E02.
boat
N16
N15
A04-83
N22
153
154
155
156
157
158
159
160
N22
N18
N20
Paste the lamp traces behind A02 as
shown and center them at the bottom.
A02
Use a craft blade to carefully skim over
the plastic to bare the copper wire.
161
162
163
R02
R03
164
T02
22
R01
R01
Roll and seal the duly twist copper
with the white tape R03 provided.
A04-78
R03
R02
How to assemble the battery holder
Statement: the lamp wires cannot be inserted into
the output socket.
– – Can use 7 batteries
– – Please notice the place of anode
and cathode when pit in the batteries
– – Rechargeable batteries are not blunt electricity
– – Rechargeable batteries can only be charged
under adult supervision
– – Rechargeable batteries should be
removed from the toy before charging
– – Different types of batteries cannot mix;
Do not mix new batteries in use with semi-used batteries.
– – Run out of battery should be removed from the toy
– – The power shall not be short circuit
3. Twist the following wire together:
(I) BLACK wire from the battery box with the WHITE wire
from LED bulb.
(II) RED wire from the battery box with the GREY wire from
LED bulb.
Place the battery box in the
allocated space.
Twist the same color wire together.
Trim all the LED wiring to the same length.
Paste the lamp wire as shown in the figure.
Paste the lamp wire as shown in the figure.
Twist the same color wire together.
Summary of Contents for L906
Page 1: ...L906 Instruction manual ...
