Honeywell X-DA4125, User Manual

Page: 13 / 29

3
1 Introduction
This chapter introduces the X-DA4125 High Efficiency Power Amplifier features and functions. The
X-DA4125 High Efficiency Power Amplifier is referred to as “DA” throughout the remainder of this
manual.
The DA amplifies audio signal power it receives from audio input devices to maintain clarity and
volume when broadcast over many speakers.
Features
The DA includes the following features:
•
A CLASS-D power amplifier with high efficiency and energy conservation
•
Contains four independent channels
•
The rated output power of each channel is 125W
•
Each channel has 100V or 70V of output
•
Supports balanced or unbalanced audio input
•
Heat radiation through forced air-cooling mode
•
Able to automatically limit output voltage
Functions
The DA includes the following main functions:
•
Main and Backup Power Supplies
•
Power Supply Protection
•
Error! Reference source not found.
•
Overload and Short Circuit Protection
•
Fault Detection and Fault Logs
•
Self-Test Function
Main and Backup Power Supplies
The DA includes main and backup power supplies. Typically the main power supply is used, and
only if a fault occurs is the backup power supply used. If a main power supply failure or fault occurs,
the DA front panel
POWER and AC1 FAULT indicator lights turn on. In this case the DA also
signals a fault, causing the backup power supply to take over from the main power supply. Once
the main power supply has recovered from the fault, the DA reverts to using it again.
Power Supply Protection
If a power supply fault occurs, the DA automatically disconnects the main power supply.